Lifting Attachments

Attachments for every application

Mi-Jack supplies various types of lifting attachments for all types of equipment. From magnets and straps to twist locks and multiple pick points, Mi-Jack equips your Travelift with the spreader bar attachments needed to handle any steel, precast, manufacturing, wind, or bridge related load.

Test
Wind Turbine Section Lifting Using a Spreader Bar with Twist Locks and Multiple Pick Points
  • 130’ spreader bar featuring multiple pick points 
  • Handles up to 30k lbs and 170’ blades 
  • Able to pick up blades with either straps or twist locks  
Wind Turbine Blade Lifting Using a Spreader Bar with Straps and Multiple Pick Points
  • 130’ spreader bar featuring multiple pick points 
  • Handles up to 30k lbs and 170’ blades 
  • Able to pick up blades with either straps or twist locks 
Tandem lifting of a wind turbine section using I beams with center swivels and J hooks.

Wind turbine section lifted by two Travelifts with I beams featuring center swivels and J hooks. 

Using magnets to handle slabs

Travelift using magnets to lift steel slabs  

Handling slabs using straps on an I beam spreader

Travelift carrying a slab out of a building using straps on an I beam spreader 

Sound Barrier Handling on An Airfield
  • 75’ spreader with 13 crossbeams spaced at 6’ centers 
  • Two pick points on each crossbeam 
  • Designed to minimize the depth under the spreader due to height of the sound barrier product 
Comparison of two travelifts handling slab. On the left, rigging is being used, which is a two-person job. On the right, magnets are being used, which is a one-person job.
  • Rigging for slab versus using magnets for slab  
  • The use of magnets for handling slab transforms the job int a one-person operation.  
  • 12 magnets are being used for handling the relatively fragile load 
Large cylinders being handled by a Travelift that has a power rotating spreader bar with a center pick point.
  • Power rotating spreader bar with a center pick point.  
  • Rotates 360 degrees  
  • Operated from the cab 
A section of pipe for an oil project being lifted by an I beam spreader bar with slides

I beam spreader bar with slides for handling pipe; allows for pipes to be brought over to modules for oil projects. 

An MJ30 on rails has sliding crossbeams and multiple pick points and is handling a large section of concrete.
  • MJ30 on rails handling concrete using sliding crossbeams that are attached to the main beam. 
  • Each crossbeam has 5 pick points. 
  • The front and back are attached via a cable so they stay symmetrical to the center line of the spreader.  
Spreader bar handling metal plates with magnets

Metal plates being lifted by magnets on the spreader bar of a Travelift.

Main aux hoist spreaders featuring two slides each for lifting large machines

Large machinery being handled by a Travelift that has main aux hoist spreaders with two slides each 

Magnets handling billets

Piles of billets beneath a Travelift being handled using magnets on a spreader bar 

Long Product Handling

Two Travelifts handling long product with center pick point spreaders 

Handling generator units with a rectangular beam and four slides

Generator unit being handled by a Travelift featuring a rectangular beam and four slides 

Fixed Container Spreader

20’ fixed container spreader

Expandable container spreader, 20’-40’

Travelift stacking containers with an expandable container spreader 

Long and Short Product Handling
  • 26’ spreader with a center pick point and two slides 
  • Center pick point is for handling long products using two Travelifts 
  • Two slides are for handling shorter products with one Travelift 
Travelift lifting CAT wheel loaders using dual trolley and two interface beams
  • CAT wheel loader handling using a dual trolley machine with two interface beams on a Travelift 
  • Creates a wider pick point to grab wheel loaders with.  
CAT wheel loader being lifted by an MJ100 using a dual trolley and two interface beams
  • Handling wheel loaders for CAT using a dual trolley machine with two interface beams on an MJ100. 
  • Creates a wider pick point to grab wheel loaders with.  
Travelift handling a carry deck crane using an I beam spreader with crossbeams

Handling a Carry Deck crane using an I beam spreader with crossbeams on top for reducing depth.  

Large metal cylinder lifted by a box beam spreader with slides
  • Box beam spreader with slides allows for more room beneath the spreader than typical I beams. 
  • Typically used for indoor/outdoor applications that necessitate lower machine heights and thus require additional space be made below the spreader bar.  
Box beam spreader with various pick points for handling concrete forms

A box beam spreader with various pick points lifts a concrete form

Aux main hoist spreader bar for handling concrete

A Travelift handling a concrete slab with aux main hoist spreader bars 

Auto leveling trolley wheels on I beam spreader bars

A Travelift with auto leveling trolley wheels on an I beam spreader bar handling a concrete slab.  

Auto extendable and retractable spreader bar for handling rebar

Rebar being lifted by an auto extendable and retractable spreader bar.

Dual Trolleys on an MJ30 handling Carrier air conditioning units

Air conditioner unit being handled by dual trolleys on an MJ30 Travelift. 

750D Spreader bar with 14’ wing crossbeams that a construction company is using to handle electrical modules.

Travelift handling electrical modules using a 750D spreader bar with 14’ wing crossbeams.

62’ Main and Aux hoist spreader bar with slides

Concrete slab handling with a 62’ main and aux hoist spreader bar with slides

Stay Up To Date With Mi-Jack Products